THE MOST COMPACT AND COMPLETE
It’s complete and performing. The most “slim” model of the “easy” family. Although its reduced sizes, it doesn’t lack in functionality and performances. The control electronics, the inner prefiltration Profine®, the flow rate of 140 l/h and its reliability place it in professional reverse osmosis system sector.
It is as good as its bigger “sisters”!
PRICE: INCREDIBLE!
It’s the most competitive in market in equal performances. This characteristic allows to satisfy every demand in professional field even where a treatment system is regarded as a too costly option but necessary.
1. SIZES: VERY MODERATE!
It could be placed everywhere because of its reduced encumbrance (435x555x120 mm). It will never be a burden because it is practical, handy and easy to install because it weights only 16kg. The possibility of removing completely its upper cover and an extremely orderly hydraulic circuit (due to Think:Water block) give an easy activity in maintenance. Finally, the cage was built in stainless steel AISI 304 SB.
2. PERFOMANCES: UNIQUE!
Easy:Slim has a flow rate of 140 l/h at 15°C, a 95% typical rejection. Recovery ratio is 40%. The residual salinity can be adjusted.
3. MAINTENANCE: EASY!
Easy:Slim has a system of high quality Profine® prefiltration with a quick connection. The only user activity of maintenance, that you will do, is to change used-up cartridge with a quarter of rotation.
4. ELECTRONICS: IT’S ALL RIGHT!
Setting your own configuration is very easy, it’s possible to read conductibility, filter capacity and operation hours from set up. Malfunctioning alarms are on display and sound.
5. SYSTEM BYPASS VALVE
The by-pass valve allows to put the system in by-pass
if this is off or temporarily not working.
TECHNICAL SHEET
EASY:SLIM Professional reverse osmosis system, maximum flow in the smallest dimensions. |
Applications Every industrial and professional applications Ho.Re.Ca., pharmaceutical, cosmetic, food industry, chemical, analysis. Dish/glass washers with atmospheric boiler and rinse pump. Max consumation 3 l each 2 minutes. |
Electronic control Inner perfiltration Profine® flow rate of 140 l/h at 15°C |
230V 50Hz |
Connections in 3/4”M – BSP out 3/4”M – BSP |
Drain 6 mm quick fitting |
Dimensions 435 x 555 x 120 mm |
![]() |
![]() |
EASY:SLIM SPECIFICATIONS
Width x Depth x Height (mm) (without fittings) |
435x555x120 |
Weight (kg) | 16 |
Approved Decibel Level under normal operating conditions (dB (A)) |
<70 |
Membranes (no. 4) | TWA6A1 |
Carbon filter (internal) | PROFINE® BLU small |
WATER SUPPLY SPECIFICATIONS |
|
Water type | Potable |
Maximum hardness (°F) | 30 |
Maximum temperature (°C) | 35 |
Minimum inlet flow rate (l/h) | 400 |
Maximum inlet pressure (kpa) | 600 |
Minimum inlet pressure (kpa) | 100 |
POWER SUPPLY SPECIFICATIONS |
|
Power supply type | MONOPHASE + GROUND |
Voltage (V) | 230 |
Frequency (Hz) | 50 |
Adsorbed current (A) | 1.5 |
Power (W) | 150 |
Fuse type electronic board | T3.15 |
PERMEATE WATER SPECIFICATIONS |
|
Maximum capacity at 15°C (l/h) | 140 |
Recovery (%) | 40 |
CAPACITY AND SUBSTITUTION FREQUENCY |
|
Carbon filter PROFINE® BLUE small (l) | 10.000 |
R/O Membranes | UPON CLOGGING |
Vane pump and solenoid valve | 2000 hours |
ENVIRONMENT SPECIFICATIONS |
|
Maximum relative humidity (%) | 90 |
Minimum external temperature (°C) | 3 |
Maximum external temperature (°C) | 40 |