Demineralisation total.
Profine Yellow
Profine® Yellow is the total demineralisation of water. Thanks to the mixed-bed resin, salinity removal is total. It is used for the production of demineralised water especially in technological and industrial plants. Potable use is prohibited.
The advantages:
- Total demineralisation
- Use in technological and industrial installations
Demineralisation total.
Profine Yellow
Profine® Yellow is the total demineralisation of water. Thanks to the mixed-bed resin, salinity removal is total. It is used for the production of demineralised water especially in technological and industrial plants. Potable use is prohibited.
The advantages:
- Total demineralisation
- Use in technological and industrial installations
Technical Data
| SMALL | MEDIUM | LARGE | |
|---|---|---|---|
| Maximum flow rate | 1 L/min * | 1,5 L/min * | 2 L/min * |
| Autonomy | 250 L * | 400 L * | 500 L * |
| Operating pressure | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar |
| Temperature | Min. 4 Max. 30°C (40-86°F) | Min. 4 Max. 30°C (40-86°F) | Min. 4 Max. 30°C (40-86°F) |
* Capacities may vary depending on the incoming water and flow rates.
| BIG 2.0 | BIG 3.0 | BIG 4.5 | BIG 6.0 | |
|---|---|---|---|---|
| Maximum flow rate | 2,2 L/min * | 3,3 L/min * | 5 L/min * | 6,5 L/min * |
| Autonomy | 550 L * | 800 L * | 1200 L * | 1600 L * |
| Operating pressure | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar | Min. 2 – Max. 6 Bar |
| Temperature | Min. 4 Max. 30°C (40-86°F) | Min. 4 Max. 30°C (40-86°F) | Min. 4 Max. 30°C (40-86°F) | Min. 4 Max. 30°C (40-86°F) |
* Autonomy calculated on water with a salinity of 250 μS/cm. * Based on manufacturer’s internal tests.
Why choose Profine filters.
3 reasons to choose our Profine filters.
- 1000 plastic bottles
- 52KG CO2 input
- 11KG of oil
Choose Profine a sustainable choice that helps the environment and the family.
Thanks to Profine water,
you reduce plastic consumption.
When it comes to water we have to expect the maximum!
For this each single component is subjected to
very precise dimensional tests before being
placed in the production lines.
More tips for YOU
Need more information?
Leave your details and we will contact you as soon as possible.